Categories

Hot Products

News

Cleaning Of Cold Rolled Ribbed Steel Wires And Bar Machine
Nov 22, 2018

Cleaning Of Cold Rolled Ribbed Steel Wires And Bar Machine

 

In order to improve the service life of Cold Rolled Ribbed Steel Wires And Bar Machine and improve the pass rate of Cold Rolled Ribbed Steel Wires And Bar Machine, many customers have increased the maintenance of Cold Rolled Ribbed Steel Wires And Bar Machine. The cleaning of the Ribbed Steel Wire Cold Rolled Machine as one of the most practical and simple maintenance methods has also been included in the daily maintenance of the user. As far as the Ribbed Steel Wire Cold Rolled Machine is concerned, the most cleaning work is removing oil. Many customers use the following two cleaning methods in the process of removing the oil from the Ribbed Steel Wire Cold Rolled Machine.

       

First, the chemical degreasing method:

       

1. Organic solvent degreasing: commonly used organic solvents are gasoline, kerosene, diesel, acetone and so on.

       

2. Alkaline solution degreasing: such as caustic soda, sodium carbonate, sodium silicate sodium phosphate and so on.Increasing the temperature of the solution and stirring during cleaning can speed up the degreasing effect.Generally, it can be heated to about 80℃, washed with hot water and dried with compressed air.

       

Second, electrochemical degreasing method

       

The method of mechanically stirring and peeling of the bubbles generated by the two electrodes during electrolysis to remove the grease from the surface of the part is called an electrochemical degreasing method. The method has the advantages of high speed, high efficiency and thorough degreasing.

       

The cleaning of the Ribbed Steel Wire Cold Rolled Machine is the above.For more details, please visit www.jindimachine.com or call: 0371-64388822,13674996266 to consult with us!


Tel: 86+13674996266, 86+37164388822

Email: rachellee@jindimachine.com  

Website:http://www.jindimachine.com 


  • QR CODE
  • facebook