Packaging Of Cold Rolled Ribbed Steel Bars
According to the knowledge of Gongyi Jindi Metallurgical Equipment Co., Ltd, the packaging of cold rolled ribbed steel bars contains three items, that is the mark, packaging and quality manual of cold rolled ribbed steel bars. The specific contents are as follows:
1, Each plate (bundle) of cold rolled steel bars should be bundled evenly for not less than 3 passes, and the ends should be bent into the coil.
2, The surface of Cold rolled steel bars should be rolled mark number, the mark spacing is twice of the transverse ribs spacing, a transverse rib within the mark spacing is canceled; ribbed steel surface can also be rolled up the diameter or production Factory code.
3. Each bundle of cold rolled steel bars must be labeled. Indicate the manufacturer, product name, date of manufacture, steel grade and specifications.
4. In addition to the above provisions, the packaging, marking and quality certificate of cold rolled steel bars shall comply with the relevant provisions of GB/T 2101 or GB/T 2103.
Tip: After testing of cold rolled ribbed steel(tensile test, stress relaxation test, size measurement), if there is no problem with quality, that can be traded.The machinery and equipment produced by Gongyi Jindi Metallurgical Equipment Co., Ltd include: cold rolling mill, steel cold rolling machine,rebar cold rolling mill, cold rolled ribbed steel bar machine, steel rebar rolling mill and cold rolled steel mill, cold rolled ribbed steel bar production line, wire-receiving machine, steel bar Straightening cutting machine, steel straightening machine, steel cutting machine, flying shear cutting machine, steel bar stretching machine, high-frequency heat treatment equipment, steel straightening and cutting machine, I-shaped wheel take-up machine, steel filp rack, etc.For more details, please visit www.jindimachine.com or call: 0371-64388822,13674996266 to consult with us!
Tel: 86+13674996266, 86+37164388822