Categories

Hot Products

News

Requirements For Cold Rolling Mill Roller Adjustment
Sep 07, 2018

Requirements For Cold Rolling Mill Roller Adjustment 


Many customers use cold rolling mills for cold rolling operations, and they have to adjust the cold rolling mill roller due to the change in the diameter of the rolled pieces. So what requirements should be followed to adjust the roller of the cold rolling mill? The technicians from Gongyi City Jindi Metallurgical Equipment Co., Ltd which produce cold rolling mill, cold rolling machine, two ribs cold rolling machine, cold rolled ribbed steel mill, cold rolled ribbed steel production line will explain for you in the following.


1. The appropriate roller groove should be selected according to the diameter of the rolled piece.


2. After the rolled piece feeding into the roller of the cold rolling mill, it should be ensured that the upper and lower rollers have a gap of less than 3 mm.


3. After feeding the rolled piece, rotate the handwheel to press the roller against the rolled piece.


4. The pressing capacity of the cold rolling mill roller should ensure that the rolled piece is pulled forward smoothly, and it is not allowed to see the rolling parts rotation obviously.


The requirements for the cold rolling mill roller adjustment are as described above. The machinery and equipment produced and sold by Gongyi Jindi Metallurgical Equipment Co., Ltd. are: cold rolling mill, cold rolling machine, two rib cold rolling mill, coldrolled ribbed steel bar equipment, cold rolled ribbed steel bar production line, steel bar straightening and cutting machine, steel bar Straightening machine, steel cutting machine, flying shear cutting machine, steel bar stretching machine, high-frequency heat treatment equipment, wire take-up machine, etc.Please visit www.jindimachine.com or call: 0371-64388822,13674996266 to consult with us!


Tel: 86+13674996266, 86+37164388822

Email: rachellee@jindimachine.com  

Website:http://www.jindimachine.com 


  • QR CODE
  • facebook