Rolling Method for Different Specifications Of Rebar By Cold Rolling Mill
In the process of rolling steel bars by cold rolling mills, customers often encounter rolling different specifications of rebars. However, cold rolling mill is not often required to roll different specifications of steel rebars, many customers do not know how to use cold rolling mills to roll different specifications of steel rebar.
If you want the steel rebar cold rolling mill to roll steel bars of different specifications, the method is very simple, as long as the following two steps are introduced by Gongyi Jindi Metallurgical Equipment Co., Ltd.
1. Change reducing roller
The new roller can be replaced by removing the fixing bolts on the rolling head parts, opening the rolling head, exiting the frame, and then removing the nut on the roller shaft.That the new roller can be changed.
2 Change ribbing roller
There are four grooves on the ribbing roller. Adjust the fixing bolts on both sides of the frame so that the selected mold groove is in the middle, align with the reducing roller, and then tighten the fixing bolts.
The method of rolling different specifications of steel bars in a cold rolling mill is the above two points. After a one-month running-in period, Jindi cold rolled ribbed steel mill produces steel bars of φ10mm or less, with a line speed of up to 3 m/s, and produces steel bars of φ10 or more with a line speed of up to 2.5 m/s.For more details, please visit www.jindimachine.com or call: 0371-64388822,13674996266 to consult with us!
Tel: 86+13674996266, 86+37164388822